Centrale filaire pour petites et moyennes installations. Elle gère 4 Entrées d’alarme librement programmables, 1 entrée 24H de autoprotection, 1 entrée de clé mécanique, 2 sorties d’alarme dont une à relais avec échange libre. Elle gère sur bus dédié composé de 4 conducteurs un maximum de 4 claviers (KP100D avec afficheur LCD ), un maximum de 4 lecteurs DK2000 pour clés reprogrammables, 1 expansion d’entrées/sorties EP100 . L’installation peut être subdivisée en 3 divers secteurs auxquels peuvent être associées librement les entrées disponibles et les utilisateurs à la gestion.
Absorption de la carte de la centrale de 12 V -50 mA en repos avec entrées équilibrées -70 mA avec entrées NF -85 mA avec entrées NC et relais excité
Tension de fonctionnement de la centrale de 10.5 V à 15 V
Tension nominale de sortie 13,8 V— (à la sortie des câbles de la batterie)
Courant max. fourni 1 A (consommation de la centrale comprise)
Ondulation max 230 mV p.p. avec I=1 A
Courant disponible pour les dispositifs ext.100 mA (pour 12 heures d’autonomie)
Accumulateur assigné 12V— 2.2Ah
Tamper anti-effraction 1A@24V
Température de fonctionnement déclarée -10 °C ÷ +55 °C
Longueur max. de la ligne série centrale-périphériques 500 mètres (câble 2×0.75 pour alim + 2 x 0.22 x données)
Courant max. des sorties électriques 10mA
Temps d’entrée min/max de 0 s à 90 s par pas de 10
Temps de sortie égal au temps d’entrée + 10 s
Temps d’alarme relais programmable de 30 s à 9 min
Signalisation visuelle de panne (LCD – afficheur à cristaux liquides) et électrique pour batterie centrale déchargée, fusibles (F1 uniquement), alimentation extension insuffisante
Temps d’alarme des sorties progr. panne tant que la panne demeure
Seuil batterie déchargée 11.2V— ± 5%
Test batterie automatique en cas d’absence de tension secteur
Indice de protection de l’emballage IP30/IK02
Pour plus d’informations sur le produit écrivez-nous
Homologation EN 50131-2-4 / GRADE 2 Détecteur à double technologie PIR/MW avec double analyse numérique, portée de environ 15 mt, angle d’ouverture de 90°, pyroélectrique à double élément, résistances internes…
La X64 GSM/GPRS est une centrale d’alarme hybride (zones filaires/radio) pour la protection des bâtiments. Il a support audio intégré et il est équipé de 8 zones filaires intégrée extensibles…
Iside140 est une sirène autoalimentée au design novateur. Sa forme elliptique permet de la fixer dans n’importe quelle position, verticale et horizontale, sans en altérer la fonctionnalité. Sa surface plate…
La SérieX / SérieX V sont des centrales d’alarme pour la protection des bâtiments. Système hybride (zones filaires/radio). EN 50131, Grade 2, Classe 2 approuvé. Elles ont un support audio intégré et sont équipées de 4/8 zones…
IP1-W (Compatible avec les centrales d’alarme SérieK V, SérieX V, XR V) Extension IP avec module Wi-Fi intégrée pour connecter la centrale au Cloud, sans câbles, en se connectant au réseau Wi-Fi…
Avis
Il n’y a pas encore d’avis.